Electromagnetic Compatibility financial Korea Communications Commission (KCC) registration Wireless Telegraphy Based on Article 57 of the surge in the use of electricity, electronics and from these devices. Cause and prevention of industrial accidents caused by equipment malfunction, and communication disorders that occur due to unwanted electromagnetic Active coping in developed countries around the protection of trade being implemented by the domestic propagation environment protection and international competitiveness of domestic products inventory.

Energy consumption efficiency grade indication system is the compulsory report system to promote consumers to purchase highly efficient energy-saving products, and manufacturers or importers to produce and sell the energy-saving products in stage of production or importing.

Energy consumption efficiency grade indication system is the compulsory report system to promote consumers to purchase highly efficient energy-saving products, and manufacturers or importers to produce and sell the energy-saving products in stage of production or importing.

Standby power reduction program is a mandatory reporting system for expanding the dissemination of products of excellent standby power reduction, which reduces standby power when not in use, and promoting the related technologies.

CE Marking is the passport for products to get into member countries in European Union market. CE mark is suitable for every member country in European Union. After May 2004, member countries increase to 25, so Directives cover 25 member countries in European Union and 3 EEA, totally 28 countries. 25 member countries include Austria, Belgium, Denmark, Finland, France, Germany, Greek, Ireland, Italy, Luxembourg, Netherlands, Portugal, Spain, Sweden, England, Slovenia, Cyprus, Malta, Poland, Czech Republic, Eesti, Hungary, Latvia, Republic of Lithuania, Slovakia and 3 EEA include Iceland, Norway, and Liechtenstein. Since Jan. first, 1996, almost all the electrical products have to meet the requirements of 89/336/EEC and mark CE to be sold on European market. It’s mandatory that all factories have to follow the rule. EMC includes EMI and EMS.

The Restriction of Hazardous Substances Directive 2002/95/EC, (RoHS 1), short for Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment, was adopted in February 2003 by the European Union.
The RoHS 1 directive took effect on 1 July 2006, and is required to be enforced and become law in each member state. This directive restricts (with exceptions) the use of six hazardous materials in the manufacture of various types of electronic and electrical equipment. It is closely linked with the Waste Electrical and Electronic Equipment Directive (WEEE) 2002/96/EC which sets collection, recycling and recovery targets for electrical goods and is part of a legislative initiative to solve the problem of huge amounts of toxic electronic waste. In speech, RoHS is often spelled out, or pronounced /ˈrɒs/, /ˈrɒʃ/, /ˈroʊz/, or /ˈroʊhɒz/, and refers to the EU standard, unless otherwise qualified.

VDE is the German national product logo. VDE testing agencies and Certification Institute is the subsidiary bodies of the Association of German electrical engineers, it was founded in 1920 , electronic appliances and their parts as an internationally recognized safety testing and certification body, and enjoy a high reputation in Europe and even in the international . Customers around the world showed a rising trend. The VDE testing agencies and certification associations under the current European and international standards, and each year about 2200 German customers and about 2700 foreign customers .

VDE is the German national product logo. VDE testing agencies and Certification Institute is the subsidiary bodies of the Association of German electrical engineers, it was founded in 1920 , electronic appliances and their parts as an internationally recognized safety testing and certification body, and enjoy a high reputation in Europe and even in the international . Customers around the world showed a rising trend. The VDE testing agencies and certification associations under the current European and international standards, and each year about 2200 German customers and about 2700 foreign customers .

GS-Mark is owned by the German government logo, developed in accordance with the German Equipment Safety Law (GSG), the unit in charge of ZLS, voluntary certification is recognized by the European Union. Electrical, mechanical or electrical products as long as printed with GS mark that is tested in accordance with the German product safety standards, the only product safety testing and certification laboratory accredited to grant GS mark. GS on behalf of the implications of the subjects products comply with the latest European or German standards. “GS” MARK flag indicates that the meaning of the test and security “is any product in the test units to comply with the relevant safety standards, and allowed to be marked on the product of the GS mark, to prove that the product has been subject to verification qualified. GS mark is a method of industrial products in Germany only statutory safety signs.

ETL SEMKO (formerly Electrical Testing Laboratory) is a division of Intertek Group plc (LSE: ITRK) specialising in electrical product safety testing, EMC testing, and benchmark performance testing. ETL SEMKO operates more than 30 offices and laboratories on six continents. SEMKO (Svenska Elektriska Materielkontroll Anstalten “The Swedish Electric Equipment Control Office”) was, until 1990, the body responsible for testing and certifying electric appliances in Sweden. The “S” mark was mandatory for products sold in Sweden until the common European CE mark was adopted prior to Sweden’s accession to the European Union.

Norges Elektriske Materiellkontroll (NEMKO) is a Norwegian private organization that supervises safety testing for electrical equipment manufacturing.
The Nemko Group offers testing, inspection and certification services concerning products, machinery, installations and systems worldwide.
The original NEMKO was established in 1933 as an institution for mandatory safety testing and national approval of electrical equipment marketed and sold in Norway for connection to the public utility network.
Since 1992, both the scope of services and the global presence of Nemko have been greatly expanded.

BSI Group, also known in its home market as the British Standards Institution (or BSI), is a multinational business services provider whose principal activity is the production of standards and the supply of standards-related services.
The BSI Group head office building in Chiswick, London BSI Group was founded as the Engineering Standards Committee in London in 1901.[3] It subsequently extended its standardization work and became the British Engineering Standards Association in 1918, adopting the name British Standards Institution in 1931 after receiving its Royal Charter in 1929. In 1998 a revision of the Charter enabled the organization to diversify and acquire other businesses, and the trading name was changed to BSI Group.
The Group now operates internationally in 172 countries.[4] The core business remains standards and standards related services, although the majority of the Group’s revenue comes from management systems assessment and certification work.[5]

RCM (Regulatory Compliance Mark) represents Safety + EMC = self-declaration, it’s the trading mark owned by both supervisory institute in Australia and New Zealand, shows that the product meet both Safety and EMC requirements. It’s Voluntary. Before you apply for RCM, you have to get SAA cert. number (Supplier Code No., abbr. SCN。) first.

The IECEE is the IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components being a body of the International Electrotechnical Commission. The IEC CB Scheme is multilateral agreement to allow international certification of electrical and electronic products so that a single certification allows worldwide market access.
The predecessor of IECEE was a European body founded under the name of Commission internationale de réglementation en vue de l’approbation de l’équipement électrique (International commission on rules for the approval of electrical equipment)[3] known as CEE. Historically this certification process goes back to 1929 based on an initiative by the German VDE (Verband der Elektrotechnik, Elektronik und Informationstechnik).

From April 01, 2001, Japan “電氣產品控製法（DENTORI）” officially renamed“電氣用品安全法（DENAE）”, briefly named”Electrical Security Laws” and simultaneously use PSE mark (Product Safety of Electrical Appliance & Materials）, it will strengthen the punishment rules of importers.
Mainly divide compulsory certified diamond PSE, circle PSE and voluntary certified S-Mark. The electrical products in Japan could be divided specific electrical products (diamond PSE, total 116 items) and non-specific electrical products (circle PSE, total 339 items), PSE application must be authorized by Japan economical verified units (as JET, JQA…) issue the formal certification then proceed Japan procedure by Japanese agents.

The VCCI certification is for IT equipment of electromagnetic control, and it belongs to EMC certification. VCCI certification is non-compulsory, briefly, it’s voluntary certification. Only the member in the VCCI lab could do this certification with authority, therefore, the reports must be issued by the lab with authorized VCCI certification. The manufacturers have to be the member of VCCI first then could use VCCI mark, and the members have to pay the entrance fee and the member fee per year. The customers could use VCCI mark after receiving the testing report and pay the entrance fee and member fee.

Radio Act requires that the specified radio equipment type approval (ie, technical regulations conformity certification). Certification is mandatory, the certification body for the MIC specified radio range of equipment approved by a registered institution. TELEC requirements related (Telecom Engineering Center) is a Japanese radio equipment shall meet the certification registered certification body.

The compulsory products certification in China also known as CCC (China Compulsory Certification, briefly named 3C certification). It’s supervised by State Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China （AQSIQ） and China National Certification and Accreditation Administration Committee（CNCA）according to the announcement by year 2001, Dec. 03《Mandatory product certification regulations》（The State Administration of Quality Supervision, Inspection and Quarantine Order No. 5）executed by CNCA and carried out since year 2002, May 01. The applicable products have 132 types at present. The goods must be with CCC certification for the export, import and all the business ways in China.

The full name of PSB called Singapore Productivity and Standards Board, it’s the legal organization of the Ministry of Trade and Industry which is in charge of the relevant laws and regulations requests all the registered controlled products should printed PSB mark. One PSB certification could put only one model no,, variability model could not be accepted, i.e. XXXX, YYYY.

BSMI (Bureau of Standard, Metrology and Inspection) The Bureau of Standards, Metrology and Inspection (BSMI) under the Ministry of Economic Affairs is the authority responsible for standardization, metrology and product inspection in Taiwan.
The activities of the BSMI encompass the development of national standards, the verification of weights and measuring instruments, the inspection of commodities and the provision of other certification or testing services. The BSMI has seven departments, six administrative units, six branches and thirteen offices. The six branches are located in Keelung, Hsinchu, Taichung, Tainan, Kaohsiung and Hualien.
In an effort to enhance industrial competitiveness, maintain fair trade, and protect consumers as well as ensuring sustainable economic development, the Bureau of Standards, Metrology and Inspection under the Ministry of Economic Affairs has been dedicated to promoting standardization, metrology and inspection systems in line with international practices.

SIRIM is only the certification agency in Malaysia. Any factory or company can apply through SIRIM. In principle, these certifications are voluntary, but the government will ask for compulsory certification under many circumstances from the local government requests.

SASO is the abbreviation of Saudi Arabian Standards Organization. Lots of SASO standards are based on IEC safety standards. Saudi Arabian industry and business affair department and SASO require that all compulsory products have to import to Saudi Arabian Customs with SASO certification. Those without SASO certification will be rejected by Saudi Arabian Customs.

America UL is the earliest developer of safety standards, has over hundred years of experience about professional test and approval. UL marl is the safety signal which America customers can recognize immediately and grant highly agreement.

As known as America Federal Communications approval, FCC（Federal Communications Commission）was an individual institute that Federal Communications Commission established by COMMUNICATIONACT in 1934, is responsible to the Congress. FCC coordinates the communication between national and international through wireless radio, television, telecom, satellite and electric cable. Involving over fifty states in America, Colombia and colonization of America. To ensure the safety of wireless radio and telecommunication that related to life and asset, Office of Engineering and Technology of FCC in charge of committee’s technical supports. Meanwhile, they in charge of equipments’ approval affairs. Many wireless radio application, telecommunication and digital products require FCC approval before entering America market.

“Energy Star “ is economical energy system which operate by United States Department of Energy and Environmental Protection Agency in 1992. Nowadays, most of products on America market which matches economical energy would be marked “Energy Star “label. “Energy Star “label is for products which consume less power than the lowest power consuming standard regulate. America government takes this “Energy Star “measure to change consumers shopping habit, developing the economical energy conception of consumers and manufactures.

Underwriter Laboratories – UL certification
Product liability legislation is far stricter in Canada and the US than in Europe. Whoever wishes to export their products to North America should therefore see to having them UL certified, especially when electric appliances are concerned.
For this reason, the use of UL-certified materials and parts is increasingly decisive in the development of electronic appliances and components.
We have taken all the necessary measures for our products to comply with UL safety standards.

Canadian Standards Association, CSA. Standards that formulated by CSA are taken by Canada as national standards. Furthermore, CSA represent Canada to intend mutual formulation on international standards.
CSA is the biggest safety institute in Canada, it can provide safety approval for machinery, building materials, electric equipment, computer equipment, etc.

Innovation, Science and Economic Development Canada (French: Innovation, Sciences et Développement économique Canada) is the department of the Government of Canada with a mandate of fostering a growing, competitive, knowledge-based Canadian economy.
The Department headquarters are located at the C.D. Howe Building at 235 Queen Street in Ottawa, Ontario.
Innovation, Science and Economic Development Canada works with Canadians throughout the economy, and in all parts of the country, to improve conditions for investment, improve Canada’s innovation performance, increase Canada’s share of global trade and build an efficient and competitive marketplace.

NOM is the Spanish abbreviation of Mexico official standard — Norma Official Mmoana, a mandatory safety mark, indicating the product matches the NOM standards. EMC is not necessary for NOM and IEC standards are not acceptable. Only NOM standards according to Mexico are permitted to follow. No matter the product is local produced in Mexico or imported from other country, it has to follow NOM standards and marking rules. Electrical products which over 24V (DC&AC) fall into mandatory scope of NOM. Wild characters are not acceptable, for example, XXXX, YYYY. One certification can only have one Trade name.
* Certification is valid for a year. If the Surveillance Audit is not performed, valid time of NOM will be shortening.

Brazil INMETRO approval. Mandatory products, for examples, plug, plug holder and electric equipment. Object products, including household electric equipment, consuming electric products and lights, etc. INMETRO is national Accreditation Body of Brazil, responsible for establish national standards. Most of Brazil products are based on IEC standards. Only the products which match Brazil standards can enter their market.